| 1. | 通報成員：厄瓜多爾 |
| 2. | 負責機構：Servicio Ecuatoriano de Normalización, INEN (Ecuadorian Standardization Service) |
| 3. |
通報依據的條款：Article 2.9.2 [X], 2.10.1 [ ], 5.6.2 [ ], 5.7.1 [ ]
通報依據的條款其他：
|
| 4. | 覆蓋的產品：Safety headgear, whether or not lined or trimmed (HS 650610)
ICS：[] HS：[] |
| 5. |
通報標題：厄瓜多爾標準協會技術法規PRTE INEN No. 086 “安全和防護頭盔”第2次修訂草案（2R）頁數：12 使用語言：西班牙語 鏈接網址： |
| 6. |
內容簡述： The notified Ecuadorian Technical Regulation establishes the requirements to be met by safety and protective headgear, prior to the marketing of domestic and imported products, with the aim of protecting human safety and preventing deceptive practices. It applies to the following products: 1. Safety headgear for general and specific use in industry. 2. Protective headgear for pedal cyclists and for users of skateboards and roller skates, including protective headgear for young children. 3. Protective headgear for use by drivers and passengers of motorcycles. It does not apply to: 1. Firefighters' helmets. 2. Military or police helmets. Helmets for canoeing or kayaking and white-water sports. |
| 7. | 目的和理由：Consumer information, labelling; Prevention of deceptive practices and consumer protection; Protection of human health or safety |
| 8. | 相關文件： Normative references:1.ISO 2859-1:1999+Amd 1:2011, Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection.2.ISO/IEC 17025:2017, General requirements for the competence of testing and calibration laboratories.3.ISO/IEC 17050-1:2004, Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements.4.ISO/IEC 17067:2013, Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes.5.EN 397:2012+A1:2012, Industrial safety helmets.6.EN 1078:2012+A1:2012, Helmets for pedal cyclists and for users of skateboards and roller skates.7.EN 1080:2013, Impact protection helmets for young children.8.ANSI/ISEA Z89.1-2014, Industrial Head Protection.9.Federal Motor Vehicle Safety Standard (FMVSS) No. 218, 49 CFR Part 571, Motorcycle helmets.10.UN Regulation No. 22 - Revision 4, Uniform provisions concerning the approval of protective helmets and their visors for drivers and passengers of motor cycles and mopeds. 24 September 2002.Notification history:G/TBT/N/ECU/407 |
| 9. |
擬批準日期：
30 days from notification or thereafter 擬生效日期： Six months from the date of adoption |
| 10. | 意見反饋截至日期：30 days from notification |
| 11. |
文本可從以下機構得到：
Contact and/or national enquiry point: Subsecretaría de Calidad Ministerio de Producción, Comercio Exterior, Inversiones y Pesca (MPCEIP) Address: Av. Amazonas entre Unión Nacional de Periodistas y Alfonso Pereira, Piso 8, Bloque amarillo Tel.: (+593-2) 3948760, Ext. 2254 - 2272 Email: puntocontacto-OTCECU@produccion.gob.ec; puntocontactoOTCECU@gmail.com; jmarino@produccion.gob.ec; cyepez@produccion.gob.ec; jsanchezc@produccion.gob.ec https://members.wto.org/crnattachments/2020/TBT/ECU/20_4551_00_s.pdf |
The notified Ecuadorian Technical Regulation establishes the requirements to be met by safety and protective headgear, prior to the marketing of domestic and imported products, with the aim of protecting human safety and preventing deceptive practices.
It applies to the following products:
1. Safety headgear for general and specific use in industry.
2. Protective headgear for pedal cyclists and for users of skateboards and roller skates, including protective headgear for young children.
3. Protective headgear for use by drivers and passengers of motorcycles.
It does not apply to:
1. Firefighters' helmets.
2. Military or police helmets.
Helmets for canoeing or kayaking and white-water sports.
粵公網安備 44010602010620號