| 1. | 通報成員：厄瓜多爾 |
| 2. | 負責機構：INEN (Ecuadorian Standardization Service) |
| 3. |
通報依據的條款：Technical Regulation (Article 2.9.2)
通報依據的條款其他：
|
| 4. | 覆蓋的產品：Other bars and rods of stainless steel; angles, shapes and sections of stainless steel (HS 7222)
ICS：[] HS：[] |
| 5. |
通報標題：Draft first revision (1R) of Ecuadorian Technical Regulation PRTE INEN No. 228 "Stainless steel bars, rods, angles, shapes and sections"頁數：10 pages 使用語言：in Spanish 鏈接網址： |
| 6. |
內容簡述： The notified Ecuadorian Technical Regulation establishes the requirements to be met by stainless steel bars, rods, angles, shapes and sections, prior to the marketing of domestic and imported products, with the aim of protecting human safety and preventing deceptive practices. It applies to the following products: Stainless steel bars, rods, angles, shapes and sections
|
| 7. | 目的和理由：Consumer information, labelling; Prevention of deceptive practices and consumer protection; Protection of human health or safety. |
| 8. | 相關文件： Normative references: 1.ISO 16143-2:2014, Stainless steels for general purposes -- Part 2: Corrosion-resistant semi-finished products, bars, rods and sections; 2.ISO 6892-1:2016, Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature; 3.ISO/IEC 2859-1:1999+Amd 1:2011, Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection; 4.ISO/IEC 17025:2017, General requirements for the competence of testing and calibration laboratories; 5.ISO/IEC 17050-1:2004, Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements; 6.ISO/IEC 17067:2013, Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes; 7.ASTM E139 - 11:2018, Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials; 8.ASTM A276/A276M-17:2017, Standard Specification for Stainless Steel Bars and Shapes; 9.ASTM A370:2018, Standard Test Methods and Definitions for Mechanical Testing of Steel Products; 10.ASTM A484/A484M-18a:2018, Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings; 11.EN 10088-3:2015, Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes; 12.EN 10088-5:2010, Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes. Notification history: 1.G/TBT/N/ECU/259 G/TBT/N/ECU/259/Add.1 |
| 9. |
擬批準日期：
60 days from notification or thereafter 擬生效日期： 180 days from the date of adoption |
| 10. | 意見反饋截至日期：60 days from notification |
| 11. |
文本可從以下機構得到：
Contact and/or National Enquiry Point:
|
The notified Ecuadorian Technical Regulation establishes the requirements to be met by stainless steel bars, rods, angles, shapes and sections, prior to the marketing of domestic and imported products, with the aim of protecting human safety and preventing deceptive practices.
It applies to the following products:
Stainless steel bars, rods, angles, shapes and sections
粵公網安備 44010602010620號